Industrial IP Speakers
IP PA Industrial Speaker 30W
- Rated Power
- 30W
- Network Interface
- 10/100 Base-TX, RJ45
Industrial IP Speakers
ST-15WIIP PA Industrial Speaker 15W
ST-15WI is part of the SipTok product range. Review the model details and request the current confirmed documentation for your project.
Confirm the current configuration
The supplied ST-15WI PDF names ST-10WI in its heading. Please request a confirmed ST-15WI document before specification.
Request confirmed specifications- Rated Power
- 15W
- Network Interface
- 10/100 Base-TX, RJ45
- Power Supply
- PoE+/12V-2A
Overview
ST-15WI is a network audio endpoint for SIP paging, notifications and streamed audio playback. Select the installation and configuration against the model-specific technical data below.
Plan network connectivity, operator workflow, mounting and power as part of the complete communication system. Explore the application guides for deployment considerations.
Key features
- Dual-speaker driver design - low frequency bass driver unit & high-frequency tweeter driver unit. Amplified audio for announcements and communication.
- Auto provisioning through SipTok IP Audio Centre for local or remote installations.
- Built-in SIP support, can be integrated with Siptok IP Audio Centre or 3rd party SIP server, SIP paging using various codecs that provide crystal clear HD voice.
- Music playback through Siptok IP Audio Centre using streamed media. HD MP3 audio files supported for superior quality of background music.
- IEEE 802.3at support is listed in the supplied product features. An external supply may also be used as specified for this model.
- Built-in amplifier with local or server-controlled volume output.
Technical specifications
ST-15WI| Parameter | Specification |
|---|---|
| Audio | |
| Codec | OPUS 48 kHz, MP3 44.1 kHz, G.722 ADPCM 16 kHz, G.711 PCMU 8kHz, G.711 PCMA 8 kHz |
| Speaker | |
| Impedance | 8Ω |
| Freq. Response/Band Width | 150-15,000Hz (±3 dB) |
| Amplifier | Built-in Class D Amplifier |
| SPL at 1kHz | 103dB/1W/1m |
| THD | less than 0.5% at 1KHz |
| Signal to Noise Ratio | 88dB |
| Network | |
| Security | Password protection, IP address filtering, Digest authentication, User access log, firewall |
| Network Protocol | SIP, ONVIF, HTTP, HTTPS, IPv4, DHCP, RTSP, RTP, RTCP, TCP/IP, UDP, ARP, SNMP, TFTP, NFS, NTP, FTP, ICMP, SSH, SSL, DNS, SNTP |
| Network Interface | 10/100 Base-TX, RJ45 |
| VoIP | Support for SIP protocol for integration with VoIP systems, integrated with SIP/PBX. 2 SIP Accounts, SIP Direct IP Call, RTP Multicast, ONVIF Codec: OPUS, MP3, G.722, PCMU, PCMA |
| General | |
| Operating Temperature | -10º to +60º C |
| Operating Humidity | 5% to 85% |
| Material | Metal Cabinet |
| Rated Power | 15W |
| Power Supply | PoE+/12V-2A |
| Installation | Wall Mount using Speaker’s Bracket |
| Dimensions | 165x220x140 mm |
| Net Weight | 2.30 Kg |
| Languages | English |
| Standard Warranty | 1 year |
| Protection | IP65 |
| Package Includes | IP PA Industrial Speaker 30W, Bracket, User Manual, Adapter (on request) |
Confirm the required configuration and current product documentation before procurement.
Product documentation
Product documents are available to approved SipTok partners and invited project teams.
Partner document accessSYSTEM CONNECTIONS
Where ST-15WI fits.
The selected speaker is an IP audio endpoint on the site LAN. An operator console and compatible audio platform provide the announcement workflow; mounting and coverage are designed for the application.
SIPTOK · SCHEMATIC DIAGRAM
ST-15WI in a network paging system
Ethernet / LANSelect a product photograph for model details
Scroll across the diagram to explore each connection.
01 · Control room & system control
Example paging operator consoleST-C10IP Announcement Console PanelEthernet / LANView product
01
SIP paging
The operator addresses the configured destination through a compatible SIP platform. Confirm audio codecs, registration and paging behaviour during commissioning.
02
Multicast alternative
Where the selected model lists RTP multicast, a compatible sender distributes audio to configured receiver groups. This is separate from SIP call registration.
Connection, power & commissioning notes
- Ethernet branches connect the shown IP devices to the site LAN switch. This is a connection concept, not a cable-routing or electrical wiring drawing.
- SIP handles call setup. RTP audio follows the configured media path; it does not necessarily pass through the SIP server. Multicast is a separate, model-supported paging option.
- Confirm power for each device independently. A PoE switch in this example does not establish the required PoE class, port budget or a universal one-cable installation.
- The supplied ST-15WI PDF names ST-10WI in its heading. Request the confirmed model document before final specification.
Photographs show actual SipTok models. This is a conceptual connection diagram; cable routes, power and final equipment are confirmed during system design.
APPLICATIONS
Where ST-15WI fits.
Explore the operating environment and communication requirements for each use case.
Industry & ManufacturingProduction & support areas
Select positions after reviewing machinery noise, acoustic coverage, mounting and the exact model’s environmental limits.
Explore the solution
Warehouses & LogisticsWarehouses & loading operations
Give dispatch teams a way to address the intended storage or loading zone through the planned IP audio system.
Explore the solution
Commercial BuildingsPlant rooms & service facilities
Consider the speaker for operational announcements where its documented installation and environment are appropriate.
Explore the solutionPRODUCT SELECTION & INSTALLATION
Questions about ST-15WI.
Review the model’s connection, installation and documentation before finalizing the system.
Ask a product expertHow do I confirm the current ST-15WI documentation?
The supplied ST-15WI PDF names ST-10WI in its heading. Please request a confirmed ST-15WI document before specification. Request the confirmed current model document from SipTok before final selection.
What should I include in a ST-15WI enquiry?
Identify the model and request the confirmed model document first. Include your application, quantities, installation conditions and required interfaces so the team can review the selection.
EXPLORE THE RANGE
Related products.
LET’S START A CONVERSATIONDiscuss your
Discuss your
IP PA project.
From product selection to system planning, share your requirements with the SipTok team.
Explore project engineering supportEmail our teamsales@siptok.in
WhatsApp+91 8590528734
Registered address & manufacturing unitN-189, Pocket N, Sector 2, DSIIDC, Bawana Industrial Area, Delhi – 110039, India