IP Intercom Systems
IP Intercom Terminal (without Camera)
- Network Interface
- 10/100 Base-TX, RJ45
- Power Supply
- PoE/12V-2A
SIPTOK / PRODUCT RANGE
IP Intercom & Emergency Intercom
Two-way communication at access points and across your site.
View system connectionsProduct models
Compare up to 3 models in one family, or add models and quantities to your project.
IP Intercom Systems
IP Intercom Terminal (with Camera)
- Network Interface
- 10/100 Base-TX, RJ45
- Power Supply
- PoE/12V-2A
IP Intercom Systems
IP Intercom Terminal (with IR Camera)
- Network Interface
- 10/100 Base-TX, RJ45
- Power Supply
- PoE/12V-2A
A CONNECTED PRODUCT FAMILY
IP Intercom Systems in the system.
See how ip intercom systems fit with the operator equipment and interfaces in an example installation. The photographs and model links refer to the supplied SipTok catalogue.
SIPTOK · SCHEMATIC DIAGRAM
IP Intercom Systems: a typical system connection
Ethernet / LANSelect a product photograph for model details
Scroll across the diagram to explore each connection.
01 · Control room & system control
Example answering phoneST-SP10IP Phone (Basic)Ethernet / LANView product
01
Assistance call
A user initiates a call from the selected terminal to its configured operator destination. The operator answers through the SIP platform.
02
Operator response
The two-way voice path supports the assistance conversation. Escalation, destination availability and call handling must be planned for the site.
Connection, power & commissioning notes
- Ethernet branches connect the shown IP devices to the site LAN switch. This is a connection concept, not a cable-routing or electrical wiring drawing.
- SIP handles call setup. RTP audio follows the configured media path; it does not necessarily pass through the SIP server. Multicast is a separate, model-supported paging option.
- Confirm power for each device independently. A PoE switch in this example does not establish the required PoE class, port budget or a universal one-cable installation.
- Models illustrate alternative or separately zoned endpoints. This is not a fixed bill of materials; select quantities and installation details for the project.
Photographs show actual SipTok models. This is a conceptual connection diagram; cable routes, power and final equipment are confirmed during system design.
SELECT WITH CONFIDENCE
Choosing ip intercom systems.
An IP intercom provides a two-way calling point for an entrance, reception or operational location. Emergency intercom use also needs a defined response workflow. Camera availability, mounting and electrical requirements differ between SipTok terminal models.
- Set the calling and answering workflow before selecting terminals.
- Coordinate the camera requirement and operator display separately.
- Check the mounting location, power and network provision for every endpoint.
How do I choose the right product?
Start with the application, installation environment and required communication method. Review the specific model’s datasheet, then share your site requirements with SipTok.
Do all models support SIP and PoE?
No. SIP endpoints, CCTV active speakers, alarm panels and switches have different interfaces and power requirements. Check the actual model specifications.
Can I request a project quotation?
Yes. Include models, quantities, site details and the intended application so our team can discuss the right configuration.
LET’S BUILD THE RIGHT SYSTEM
Discuss your projectLet’s connect your next project.
Share the models, quantities, installation conditions and intended communication workflow for a project quotation.