Industrial IP Speakers
IP PA Industrial Speaker 15W
- Rated Power
- 15W
- Network Interface
- 10/100 Base-TX, RJ45
SIPTOK / PRODUCT RANGE
Industrial IP Speakers
Purpose-selected audio endpoints for industrial spaces.
View system connectionsProduct models
Compare up to 3 models in one family, or add models and quantities to your project.
Industrial IP Speakers
IP PA Industrial Speaker 30W
- Rated Power
- 30W
- Network Interface
- 10/100 Base-TX, RJ45
A CONNECTED PRODUCT FAMILY
Industrial IP Speakers in the system.
See how industrial ip speakers fit with the operator equipment and interfaces in an example installation. The photographs and model links refer to the supplied SipTok catalogue.
SIPTOK · SCHEMATIC DIAGRAM
Industrial IP Speakers: a typical system connection
Ethernet / LANSelect a product photograph for model details
Scroll across the diagram to explore each connection.
01 · Control room & system control
Example paging operator consoleST-C10IP Announcement Console PanelEthernet / LANView product
02 · Site network
Example Ethernet switchST-PoE-8P8 Port PoE SwitchLAN switch · independent power reviewView product
01
SIP paging
The operator addresses the configured destination through a compatible SIP platform. Confirm audio codecs, registration and paging behaviour during commissioning.
02
Multicast alternative
Where the selected model lists RTP multicast, a compatible sender distributes audio to configured receiver groups. This is separate from SIP call registration.
Connection, power & commissioning notes
- Ethernet branches connect the shown IP devices to the site LAN switch. This is a connection concept, not a cable-routing or electrical wiring drawing.
- SIP handles call setup. RTP audio follows the configured media path; it does not necessarily pass through the SIP server. Multicast is a separate, model-supported paging option.
- Confirm power for each device independently. A PoE switch in this example does not establish the required PoE class, port budget or a universal one-cable installation.
- Models illustrate alternative or separately zoned endpoints. This is not a fixed bill of materials; select quantities and installation details for the project.
Photographs show actual SipTok models. This is a conceptual connection diagram; cable routes, power and final equipment are confirmed during system design.
SELECT WITH CONFIDENCE
Choosing industrial ip speakers.
Industrial IP speakers support communication planning for operational areas with different noise levels and mounting constraints. “Industrial” does not mean flameproof. A flameproof horn speaker or flameproof IP horn speaker requirement must be supported by the specific product’s hazardous-area evidence.
- Assess ambient noise, coverage and mounting before selecting output power.
- Review the actual enclosure and environmental data for the chosen model.
- Treat hazardous-area classification and certification as a separate selection gate.
How do I choose the right product?
Start with the application, installation environment and required communication method. Review the specific model’s datasheet, then share your site requirements with SipTok.
Do all models support SIP and PoE?
No. SIP endpoints, CCTV active speakers, alarm panels and switches have different interfaces and power requirements. Check the actual model specifications.
Can I request a project quotation?
Yes. Include models, quantities, site details and the intended application so our team can discuss the right configuration.
LET’S BUILD THE RIGHT SYSTEM
Discuss your projectLet’s connect your next project.
Share the models, quantities, installation conditions and intended communication workflow for a project quotation.