SIPTOK / PRODUCT RANGE
IP Ceiling Speakers
Discreet, network-connected audio for indoor environments.
View system connectionsProduct models
Compare up to 3 models in one family, or add models and quantities to your project.
SELECTION & PROJECT PLANNING
Choose an IP ceiling speaker around the room and ceiling.
Compare the two ceiling models using their published output and electrical data. Room coverage, ceiling construction, access and the confirmed mounting drawing determine the installation.
- 01
Review the room
Share room dimensions, ceiling height, typical noise and how announcements will be used.
- 02
Coordinate the ceiling
Confirm cut-out and enclosure dimensions from a current approved drawing, plus support, clearance and maintenance access.
- 03
Check the paging result
Plan network, power and zones, then test speech at the listening positions before finalizing spacing.
Swipe across the table to compare model details.
| Model | Selection consideration | Published model details |
|---|---|---|
| ST-8CIP PA Ceiling Speaker 8W | Review the 8W ceiling model for the room's assessed announcement requirement. |
|
| ST-15CIP PA Ceiling Speaker 15W | Review the 15W ceiling model. Request confirmed dimensions and weight before preparing the ceiling opening. |
|
PLANNING EXAMPLE
Classrooms and a connecting corridor
Define the rooms and corridor as listening areas before deciding announcement groups. Review each space's ceiling access and acoustics; using the same speaker everywhere does not establish even coverage. Final openings and support must follow the confirmed model drawing.
Illustrative planning scenario. Final selection and quantities require a reviewed site design.PREPARE YOUR QUOTATION
Share the details that shape the system.
- Room dimensions, ceiling height, type and available depth
- Announcement groups, operating times and background noise
- Models, estimated quantities, confirmed mounting requirements and network/power provision
A CONNECTED PRODUCT FAMILY
IP Ceiling Speakers in the system.
See how ip ceiling speakers fit with the operator equipment and interfaces in an example installation. The photographs and model links refer to the supplied SipTok catalogue.
SIPTOK · SCHEMATIC DIAGRAM
IP Ceiling Speakers: a typical system connection
Ethernet / LANSelect a product photograph for model details
Scroll across the diagram to explore each connection.
01 · Control room & system control
Example paging operator consoleST-C10IP Announcement Console PanelEthernet / LANView product
02 · Site network
Example Ethernet switchST-PoE-8P8 Port PoE SwitchLAN switch · independent power reviewView product
03 · Application zones
Example announcement endpointST-8CIP PA Ceiling Speaker 8WEthernet / LANView product
01
SIP paging
The operator addresses the configured destination through a compatible SIP platform. Confirm audio codecs, registration and paging behaviour during commissioning.
02
Multicast alternative
Where the selected model lists RTP multicast, a compatible sender distributes audio to configured receiver groups. This is separate from SIP call registration.
Connection, power & commissioning notes
- Ethernet branches connect the shown IP devices to the site LAN switch. This is a connection concept, not a cable-routing or electrical wiring drawing.
- SIP handles call setup. RTP audio follows the configured media path; it does not necessarily pass through the SIP server. Multicast is a separate, model-supported paging option.
- Confirm power for each device independently. A PoE switch in this example does not establish the required PoE class, port budget or a universal one-cable installation.
- Models illustrate alternative or separately zoned endpoints. This is not a fixed bill of materials; select quantities and installation details for the project.
Photographs show actual SipTok models. This is a conceptual connection diagram; cable routes, power and final equipment are confirmed during system design.
SELECT WITH CONFIDENCE
Choosing ip ceiling speakers.
An IP ceiling speaker keeps the audio endpoint integrated into an indoor ceiling while receiving network announcements. Compare the documented cut-out and enclosure dimensions with the ceiling construction, and coordinate spacing with room acoustics and background noise.
- Confirm ceiling depth, cut-out size and maintenance access.
- Plan room coverage and intelligibility instead of selecting by wattage alone.
- Keep network and power provision coordinated with the ceiling installation.
How do I choose the right product?
Start with the application, installation environment and required communication method. Review the specific model’s datasheet, then share your site requirements with SipTok.
Do all models support SIP and PoE?
No. SIP endpoints, CCTV active speakers, alarm panels and switches have different interfaces and power requirements. Check the actual model specifications.
Can I request a project quotation?
Yes. Include models, quantities, site details and the intended application so our team can discuss the right configuration.
LET’S BUILD THE RIGHT SYSTEM
Discuss your projectLet’s connect your next project.
Share the models, quantities, installation conditions and intended communication workflow for a project quotation.